Intermec 2430 User Guide
Chapter 5—Reader Command Reference
118
Trakker Antares 2400 Family System Manual
Scan: Follow these steps:
1
Scan this bar code label:
Enter Accumulate Mode / Transmit File
*/K/O/E/E*
*+/%%*
2
Scan the bar code label for the communications protocol you want to
use.
use.
XMODEM
XMODEM-1K
YMODEM
*X*
*K*
*Y*
*X*
*K*
*Y*
3
Scan the bar code label for the terminal COM port you are using to
transmit the file. The label also includes the required comma.
transmit the file. The label also includes the required comma.
COM1
COM2
COM4
*1/L*
*2/L*
*4/L*
*1,*
*2,*
*4,*
4
Scan the bar code labels for the file you want to transmit. You can scan
labels from the “Full ASCII Bar Code Chart” on page 284. The label
must use this format:
labels from the “Full ASCII Bar Code Chart” on page 284. The label
must use this format:
drive:filename
5
Scan this bar code label to exit Accumulate mode and transmit the file.
Exit Accumulate Mode
*-/*
*-/*
Or: You can create your own bar code labels to transmit files by creating a bar
code in this command format:
%%Xn,drive:filename (for
XMODEM)
%%Kn,drive:filename (for
XMODEM-1K)
%%Yn,drive:filename (for
YMODEM)
Example: To transmit the file SHIPPING.DAT from drive C through COM1 to
the host using XMODEM protocol, use this command:
%%X1,c:shipping.dat
Transmit and Convert 8-Bit Binary Files to 7-Bit ASCII Files
Description: Converts the file from an 8-bit binary file to a 7-bit ASCII hexadecimal
file, transmits the file from the terminal through the serial port, and saves
the file on the host computer. The terminal must be connected to the host
through a serial port.
the file on the host computer. The terminal must be connected to the host
through a serial port.