Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
232
Trakker Antares 2400 Family System Manual
Syntax: SSdata
where acceptable values for data are listed in the next table.
Scanner Selection: Acceptable Values for Data
Value Description
0
All compatible scanners (including wands)
1
146X CCD scanners (242X, 2455, 246X, 2475, 248X)
3
151X laser scanners (242X, 2455, 246X, 2475, 248X)
4
1545 laser scanner (242X, 2455, 246X, 2475, 248X)
5
Non-Intermec tethered laser scanners
6
155X laser scanners
7
Tethered long range laser scanners (242X, 2455, 246X, 2475, 248X)
10
Integrated (241X, 242X, 243X)
11
Integrated scanner / scan module, including normal, long range, high
density, or high visibility (long range or high visibility with no aim) (241X,
242X, 243X)
density, or high visibility (long range or high visibility with no aim) (241X,
242X, 243X)
12
Integrated long range, high density, or high visibility scanner / scan module
with short aim (241X, 242X, 243X)
with short aim (241X, 242X, 243X)
13
Integrated long range, high density, or high visibility scanner / scan module
with long aim (241X, 242X, 243X)
with long aim (241X, 242X, 243X)
14
Integrated PDF417 scanner / scan module (241X, 242X)
15
Serial PDF417 scanner (Intermec 1551E laser scanner) (241X, 242X,
243X)
243X)
16
Integrated non-PDF417 linear imager (241X)
17
Serial non-PDF417 scanner (Intermec 1553 XLR laser scanner) (242X,
243X)
243X)
98
No scanner
For help configuring a long range laser scanner, see the user’s manual that
shipped with your scanner.
shipped with your scanner.
Note: For 242X terminals, SS0 through SS7 work only when a module for
cabled scanners is installed on the terminal. SS12 and SS13 work only
when a long range or high visibility scan module is installed. SS11
configures the standard range and high density scan modules.
cabled scanners is installed on the terminal. SS12 and SS13 work only
when a long range or high visibility scan module is installed. SS11
configures the standard range and high density scan modules.
Note: If you are using the advanced long range scanner or scan module,
you may not be able to scan the bar code labels in this manual. However,
you can still send commands through the serial port or network. For help,
see Chapter 2, “Configuring and Managing the Terminals.”
you may not be able to scan the bar code labels in this manual. However,
you can still send commands through the serial port or network. For help,
see Chapter 2, “Configuring and Managing the Terminals.”
Default: Specific integrated scanner installed on the terminal (integrated scanners)
All compatible scanners (tethered scanners)
Menu System: Main Menu > Configuration Menu > Terminal Menu > Scanner