Intermec 2430 User Guide

nugget

39 AGaramond

 

Syntax: DMdata 

Acceptable values for data are: 

0 

Buffered display mode 

1 

Transparent display mode 

 

Default:  Transparent display mode 

 

Bar Codes:  Scan one of these bar codes: 

Buffered Display Mode 

Transparent Display Mode 

*$+DM0* 

*$+DM1* 

*$+DM0* *$+DM1* 

 

Other:  To provide compatibility with the 95XX, you can also use this syntax: 

ODdata 

where data is a 0 or 1. 

With the EM9560.BIN application, you can emulate Accumulate mode 
(Emulation mode). Data that you accumulate appears on the bottom line 
of the terminal display. You can edit this data using the reader commands 
for backspace and clear or you can use the « key. 

You scan a bar code to toggle between Emulation mode and Native mode. 

 

Default: Native 

mode 

 

Note: To set this command using bar code labels, you must also use the 
bar code labels in Appendix B. To use these labels, you must configure the 
terminal to use Code 39 in Full ASCII mode. For help, see “Full ASCII 
Mode for Code 39” on page 309 or “Code 39” on page 146. 

 

Bar Codes:  To use Emulation mode: 

Scan this bar code: 

  Toggle Emulation Mode/Native Mode 

 

*ACCUMULATE* 

 *ACCUMULATE* 

Scan this bar code: 

  Enter Accumulate Mode 

 

*+/* 

 *+/* 

Scan data from the “Full ASCII Bar Code Chart” on page 284, or type 
data using the keypad.