Intermec 2430 User Guide
Chapter 2—Configuring and Managing the Terminals
Trakker Antares 2400 Family System Manual
29
Saving Configuration Changes in Flash Memory
If you configure the terminal by scanning bar code labels, using the serial
port, or using the network, you may want to save the changes in flash
memory by:
port, or using the network, you may want to save the changes in flash
memory by:
• scanning the Save Configuration in Flash Memory reader command bar
code label.
• sending the Save Configuration in Flash Memory reader command
through the network.
• using the TRAKKER Antares 2400 Menu System.
To save configuration changes by scanning a bar code label
• Scan this bar code label:
Save Configuration in Flash Memory
*.+1*
*.+1*
To save configuration changes by sending a command through the network
• Send .+1 as the last command from the host application or the
DCS 300.
To save configuration changes using the menu system
1
Press ) ; 2 4 8 or scan this bar code:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears.
2
Choose System Menu > Store Configuration. The Store
Configuration screen appears.
Configuration screen appears.
Store configuration
changes in flash
memory?
(used when rebooting
the terminal)
24XXS033.eps
Yes
No
CANCEL