Intermec 2430 User Guide
Chapter 2—Configuring and Managing the Terminals
Trakker Antares 2400 Family System Manual
31
LOAD
DEFAULT
VALUES
Load
default
configuration
values
in
RAM?
(Overwrites
current
configuration)
24XXS034.eps
OK
CANCEL
3
Choose OK and press ; to load the default configuration values. The
default values will override the current runtime configuration on the
terminal.
default values will override the current runtime configuration on the
terminal.
To exit without loading the default values, choose Cancel and press
;. The System Menu appears.
;. The System Menu appears.
4
Press d to exit the System Menu. The Main Menu appears.
5
Choose another menu from the Main Menu or press d to exit the
TRAKKER Antares 2400 Menu System.
TRAKKER Antares 2400 Menu System.
Upgrading the Terminal
This section explains how to upgrade the firmware on the terminal and
how to load double-byte fonts, if you choose to order them after you
receive your terminal. You can also upgrade the terminal for:
how to load double-byte fonts, if you choose to order them after you
receive your terminal. You can also upgrade the terminal for:
• TE 2000 (new releases)
• Data Collection Browser
™ (dcBrowser™)
For pricing and availability, contact your local Intermec representative.
Upgrading the Firmware
When you upgrade the firmware, you remove existing applications and
files on the terminal and restore the terminal’s default configuration. Make
sure you back up your custom files and applications, such as TE 2000,
dcBrowser, and ROM-DOS
files on the terminal and restore the terminal’s default configuration. Make
sure you back up your custom files and applications, such as TE 2000,
dcBrowser, and ROM-DOS
™, so that you can reinstall them after the
upgrade procedure. For help, see “Using the Serial Port to Transfer
Applications and Files” on page 55.
Applications and Files” on page 55.
You will need to set the primary network communications parameters on
the RF terminal to reestablish communications with other devices in the
RF network. You may also need to reset the serial port or Ethernet
parameters to communicate with other devices in your wired network.
the RF terminal to reestablish communications with other devices in the
RF network. You may also need to reset the serial port or Ethernet
parameters to communicate with other devices in your wired network.