Intermec 2430 User Guide
Chapter 2—Configuring and Managing the Terminals
Trakker Antares 2400 Family System Manual
41
When creating .RCD files, note that:
• almost any Trakker Antares command can be included in an .RCD file.
Note: The Command Processing configuration command lets you
disable or enable multiple commands. Do not send the Disable All
Reader Commands command to the terminal in an .RCD file.
disable or enable multiple commands. Do not send the Disable All
Reader Commands command to the terminal in an .RCD file.
• commands that cause the terminal to reboot are processed last (after all
file processing is complete).
• any line that starts with a pound sign (#) or semicolon (;) is treated as a
comment line.
• blank lines are allowed and are not processed.
• you need to include an .RCD filed named
app_name.RCD
for your
applications. This .RCD file includes a single line of code:
//program.bin
that causes your application to run.
Upgrade Files
The Trakker Antares firmware upgrade package includes special files used
to upgrade firmware. The Enabler uses C:SYS_BLK.BIN and
C:BLOCK3.BIN to reprogram flash blocks in firmware.
to upgrade firmware. The Enabler uses C:SYS_BLK.BIN and
C:BLOCK3.BIN to reprogram flash blocks in firmware.
The Trakker Antares protocol upgrade packages include
C:_LST_FLE.TXT. The Enabler uses C:_LST_FLE.TXT to update
the list of applications loaded on the terminal.
C:_LST_FLE.TXT. The Enabler uses C:_LST_FLE.TXT to update
the list of applications loaded on the terminal.
Configuration changes that are made manually are lost when the terminal
is upgraded.
is upgraded.
Synchronization Properties and Selection Criteria
The Avalanche Agent uses specific parameters to synchronize with the
Enabler on your Trakker Antares terminal. These parameters can also be
used as selection criteria to determine which devices to send updates and
downloads to.
Enabler on your Trakker Antares terminal. These parameters can also be
used as selection criteria to determine which devices to send updates and
downloads to.
Synchronization Properties
Property
Description and Values
IP
Current IP address
Series
I (for Intermec)
ModelName ITCxxxx
where xxxx is the model of the Trakker Antares terminal, such
as 2415.
as 2415.
ModelCode
Last two digits of the terminal model number. For example,
15 indicates the 2415.
15 indicates the 2415.
Rows
Number of rows displayed while Avalanche is running