Intermec 2430 User Guide
Chapter 2—Configuring and Managing the Terminals
42
Trakker Antares 2400 Family System Manual
Synchronization Properties (continued)
Property
Description and Values
Columns
Number of columns displayed while Avalanche is running
KeyboardName
Keypad Type configuration command name that identifies the
keypad overlay
keypad overlay
KeyboardCode
Keypad Type configuration command binary value that
identifies the keypad overlay
identifies the keypad overlay
The Avalanche Enabler on the Trakker Antares terminals defines
additional properties that can be used as selection criteria. These properties
appear in the Avalanche Console only after you synchronize with the
Enabler on your Trakker Antares terminal.
additional properties that can be used as selection criteria. These properties
appear in the Avalanche Console only after you synchronize with the
Enabler on your Trakker Antares terminal.
Trakker Antares Enabler Properties
Property
Description and Values
PROTOCOL
UDP
UDP Plus protocol
TCP
TCP/IP protocol
NIC
1 OpenAir
2 802.11DS
3 Ethernet
4 802.11DS with TTLS
5 802.11DS with LEAP
FirmwareVersion
6-digit firmware version number. For example, firmware
version 8.01 is represented as 080100.
version 8.01 is represented as 080100.
Learning About Intermec Settings (ICCU)
Intermec Settings (ICCU ) is a proprietary Intermec application that
allows you to easily configure multiple Trakker Antares terminals.
Intermec Settings is available as part of a Wavelink Avalanche package
(24XXRCD). You can download the Intermec Settings package at no
charge from the Intermec web site at www.intermec.com.
allows you to easily configure multiple Trakker Antares terminals.
Intermec Settings is available as part of a Wavelink Avalanche package
(24XXRCD). You can download the Intermec Settings package at no
charge from the Intermec web site at www.intermec.com.
To configure your terminals using Intermec Settings
1
From the tree view in the Avalanche Console, expand localhost >
Software Collections > Antares Configuration.
Software Collections > Antares Configuration.
2
Right-click the 24XXRCD package, and select Configure Package >
Configure Firmware. The Intermec Settings application starts.
Configure Firmware. The Intermec Settings application starts.
3
Use Intermec Settings to select your configuration parameters.
4
From the File menu, select Save Settings. Your configuration settings
are now saved to the 24XXRCD configuration package.
are now saved to the 24XXRCD configuration package.
5
Close the Intermec Settings window.