Intermec m90 Reference Guide
Operation Modes
Chapter
—
3
26
M90 Series Portable Data Entry Unit Reference Manual
Baud Rate
Press " to toggle between the “150,” “300,” “600,” “1200,” “2400,”
“4800,” “9600,” “19200” (default), “38400,” and “57600” baud rates,
then press [ENT SCAN]:
“4800,” “9600,” “19200” (default), “38400,” and “57600” baud rates,
then press [ENT SCAN]:
< COM SETUP>
BAUD
19200 _
Length
Press " to toggle between the “7-BITS” and “8-BITS” (default) lengths,
then press [ENT SCAN]:
then press [ENT SCAN]:
< COM SETUP>
LENGTH
8 BITS _
Parity
Press " to toggle between the “NONE” (default), “ODD,” and “EVEN”
parities, then press [ENT SCAN]:
parities, then press [ENT SCAN]:
< COM SETUP>
PARITY
NONE _
Stop Bits
Press " to toggle between “1” (default) and “2” stop bits, then press
[ENT SCAN]:
[ENT SCAN]:
< COM SETUP>
STOP BITS
1
_
Flow Control
This controls the RS-232 port sending or receiving data in a
character-by-character mode. Press " to toggle between the
“XON/XOFF,” “CTS/RTS,” and “NONE” (default) flow control options,
then press [ENT SCAN]:
character-by-character mode. Press " to toggle between the
“XON/XOFF,” “CTS/RTS,” and “NONE” (default) flow control options,
then press [ENT SCAN]:
< COM SETUP >
FLOW CONTROL
NONE _