Intermec 2400 Quick Setup Guide

This guide describes how to set basic parameters
to start using the Trakker Antares

®

 2420 and

2425 terminals. You may need to refer to
additional Intermec documents to configure
the 242X for your data collection network. For
a list of documents see “Where to Go From
Here” on page 13.

The 2420 and 2425 are handheld data collection
terminals.

The 2420 has an integrated I/O port to
transmit data to and accept data from a host
computer or other serial device using RS-232
communications. You use these programmable
terminals to run custom applications.

The 2425 has all the capabilities of the
2420, and it can also communicate in a radio
frequency (RF) network. The 2425 provides
real-time communication with a host either
through the access points and the Intermec
Gateway or DCS 30X (UDP Plus or WTP)
or directly through the access points (TCP/IP).
The 2425 can also run client/server applications,
TE 2000™ terminal emulation applications,
and Data Collection Browser™ (dcBrowser™).

The 2425 with an IEEE 802.11b
radio installed is Wi-Fi certified
for interoperability with other
802.11b wireless LAN devices.