Intermec 2430 Quick Setup Guide

C d 39 nuggetfont 

Select System Menu and press v, and then select Set Time 
and Date and press v. The Time and Date screen appears. 

 

TIME

AND

DATE

Current

time

is

12:00:00

New

time:

12:39:00

Current

date

is

1996/01/01

New

date

YYYY/MM/DD:

243XQ009.eps

OK

CANCEL

 

Enter the current time in the format HH:MM:SS (hours, 
minutes, seconds). You must enter the colon character (:). 

Enter the current date in the format YYYY/MM/DD (year, 
month, day). You must enter the forward slash character (/). 

Press v, and then press e twice to exit the TRAKKER 
Antares 2400 Menu System. Choose OK to save your 
changes. 

If you are using the Wavelink Avalanche client management 
system, you can quickly configure the parameters for your 
terminal. For help, see Chapter 2, “Configuring and Managing 
the Terminals” in the 2400 Family system manual. 

You can connect the terminal to a host computer, PC, or other 
RS-232 device using the serial adapter cable (P/N 216-807-001). 
You can also insert the terminal into the vehicle dock and 
connect the dock to the RS-232 device. 

The values you set for the terminal’s serial port parameters must 
match the values set for the host’s (or other device’s) serial port 
parameters.  

Press l t 2 4 8 , l x 2 4 8 , or the 
orange > key and then * 2 4 8 to access the TRAKKER 
Antares 2400 Menu System. Choose Configuration Menu > 
Communications Menu > Serial Port [COM1].