Intermec 2480 User Guide
Configuring Terminal Emulation on the T2480 and T2485
12
To restart your TE application
•
Scan this bar code label
Reset Firmware
*-.*
*-.*
You can also send the Reset Firmware command over the network. For help, see
your TRAKKER Antares terminal user’s manual.
your TRAKKER Antares terminal user’s manual.
Or, use the TRAKKER Antares 2400 Menu System to configure the Resume
Execution command to resume “not allowed.” Choose Terminal Menu from the
Configuration Menu and then choose Power Management. Each time you press
Execution command to resume “not allowed.” Choose Terminal Menu from the
Configuration Menu and then choose Power Management. Each time you press
f
to turn on the terminal, the terminal boots and restarts your application.
The terminal restarts your TE application using the configuration saved in the TE
configuration file.
configuration file.
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
P.O. Box 4280
Everett, WA 98203-9280
© 1998 Intermec
All Rights Reserved
All Rights Reserved
067564-002
Configuring Terminal Emulation on the
T2480 and T2485 Instructions
T2480 and T2485 Instructions
*067564-003*
P/N 067564-003
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2005 Intermec Technologies
Corporation. All rights reserved.