Intermec 1470 User Guide

Aimer Delay allows a delay time for the operator to aim the imager before the picture is
taken. During the delay time, the aiming light will appear, but the LEDs won’t turn on
until the delay time is over.

In the Imager tab of Visual Menu, enter a number from 0 to 999 in the Aimer Delay

(ms) field. Click the Write Settings to Device button (

) to send the new setting to the

imager.

Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).

200 milliseconds

400 milliseconds

Off (No Delay)