Intermec 1470 User Guide
1470/1471 Imager User’s Manual
3-40
Beep On Decode
If you want the imager to beep each time it reads a bar code, leave this setting On. If
you don’t want it to beep on each read, but do want it to beep for other events (such as
error conditions), set this selection to Off.
you don’t want it to beep on each read, but do want it to beep for other events (such as
error conditions), set this selection to Off.
In the Output tab of Visual Menu, choose Beep On Decode. Click the Write Settings to
Device button (
) to send the new setting to the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
On
*
Off