Intermec 1470 User Guide
1470/1471 Imager User’s Manual
3-26
LED Flashing
When LED Flashing is On, the aiming light comes on when the trigger is pressed. The
aiming light stays on until a bar code is decoded or until the trigger is released.
aiming light stays on until a bar code is decoded or until the trigger is released.
If LED Flashing is turned Off, the average current draw is increased and the aiming
light won’t illuminate while the imager reads a bar code.
light won’t illuminate while the imager reads a bar code.
In the Imager tab of Visual Menu, choose LED Flashing Off. Click the Write Settings to
Device button (
) to send the new setting to the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
Off
On
*