Intermec 1470 User Guide
1470/1471 Imager User’s Manual
3-28
Aimer Interval
Aimer Interval turns off the aiming light or programs the aimer to come on at certain
intervals when reading bar codes with the imager. You may program the imager to use
the aimer Every Read, Every Second Read, or Every Third Read. You may also
program the imager to use the aimer every “x” reads, by entering a number from 0 to
999 to indicate “x.”
intervals when reading bar codes with the imager. You may program the imager to use
the aimer Every Read, Every Second Read, or Every Third Read. You may also
program the imager to use the aimer every “x” reads, by entering a number from 0 to
999 to indicate “x.”
In the Imager tab of Visual Menu, enter a number from 0 to 999 in the Aimer Interval
field. Click the Write Settings to Device button (
) to send the new setting to the
imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
Off
Every Read
*
Every Second Read
Every Third Read