Intermec SR60 Reference Guide

• The Enable Variable Length Format bar code on page 100 

directs the scanner to read all labels from minimum label 
length to 50. If you select variable length format, there is one 
more bar code label to scan:

• The Set Minimum Label Length bar code on page 100 

selects the minimum label length that the scanner will 
recognize. The minimum label length for this symbology 
must be between 03 and 50. Set the Minimum Length as 
high as your application allows.

• The Enable Fixed Length Format bar code on page 101 

directs the scanner to read only one or two label lengths. If 
you select fixed length format, there are three bar code labels 
for programming your scanner to read either one or two fixed 
lengths. The labels are:

• The Set First Fixed Length bar code on page 101 instructs 

the scanner that the next two programming labels scanned 
will define the first fixed label length. This setting must be 
between 03 and 50 characters.

• The Set Second Fixed Length bar code on page 101 

instructs the scanner that the next two programming 
labels scanned will define the second fixed label length. 
This setting must be between 03 and 50 characters.

• The No Second Fixed Length bar code on page 102 

configures the scanner to recognize only the first fixed 
length.

Start/Stop Characters can be either Send or Don’t Send 
depending on your host’s interface requirement. Refer to your 
host user’s manual to identify your system requirements.

Start/Stop Match can be enabled or disabled.

Note: For this symbology, the scanner decodes up to 50 
characters, but the actual length read varies depending upon the 
interface type, bar code physical size, and print quality.