Intermec 4800 User Guide
1 - 10
IBM SurePos
Scan one of the following “Plug and Play” codes to program the IT4600/4800 for
IBM SurePos (USB Hand Held imager) or IBM SurePos (USB Tabletop imager).
IBM SurePos (USB Hand Held imager) or IBM SurePos (USB Tabletop imager).
Note: After scanning one of these codes, you must power cycle the cash
register.
Each bar code above also programs the following suffixes for each symbology:
Note: The following USB “Plug and Play” codes (USB Keyboard - PC, USB
Keyboard - Mac, and USB HID) are supported on specific IT4600/4800
models. Refer to
models. Refer to
interface applies to your imager.
USB PC or Macintosh
®
Keyboard
Scan one of the following codes to program the IT4600/4800 for USB PC
Keyboard or USB Macintosh Keyboard. Scanning these codes adds a CR and
selects the terminal ID (USB PC Keyboard - 124, USB Macintosh Keyboard -
125).
Keyboard or USB Macintosh Keyboard. Scanning these codes adds a CR and
selects the terminal ID (USB PC Keyboard - 124, USB Macintosh Keyboard -
125).
Symbology
Suffix
EAN-8
0C
EAN-13
16
UPC-A
0D
UPC-E
0A
Code 39
00 0A 0B
Interleaved 2 of 5
00 0D 0B
Code 128
00 18 0B
IBM SurePos
(USB Hand Held Imager)
Interface
IBM SurePos
(USB Tabletop Imager)
Interface
USB Keyboard (PC)
USB Keyboard (Mac)