Intermec 4800 User Guide
1 - 11
USB HID
Scan the following code to program the IT4600/4800 for USB HID bar code
imagers. Scanning this code changes the terminal ID to 131.
imagers. Scanning this code changes the terminal ID to 131.
USB COM Port Emulation
Scan the following code to program the IT4600/4800 to emulate a regular RS-
232-based COM port. If you are using a Microsoft
232-based COM port. If you are using a Microsoft
®
Windows
®
PC, you will need
to download a driver from the HHP website (
www.HHP.com
)
. The driver will use
the next available COM port number. Apple® Macintosh computers recognize
the imager as a USB CDC class device and automatically use a class driver.
Scanning the code below changes the terminal ID to 130.
the imager as a USB CDC class device and automatically use a class driver.
Scanning the code below changes the terminal ID to 130.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
USB HID Bar Code Imager
USB COM Port Emulation
On
* Off
On
* Off