Leviton 47611-gt4 User Guide
6
Chapter 2
Installation
This Chapter covers the physical installation of the Internet Gateway.
Requirements
• Network cables. Use standard Cat5 or Cat5e cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
Procedure
Figure 4: Installation Diagram
Installation:
Align the mounting pins with the grid holes on the back of the enclosure. With the mount-
ing pin plungers in the “out” position, press the unit into the grid in the desired location,
then secure by pushing the plungers in.
ing pin plungers in the “out” position, press the unit into the grid in the desired location,
then secure by pushing the plungers in.
Cabling the Internet Gateway
The Internet Gateway has four network ports. The ports numbered 1-4 can be used to con-
nect a variety of equipment, including computers, printers, scanners or other network
peripherals. Additionally, the Internet Gateway features a WAN port. The Internet Gate-
way ncan replace an existing hub or switch that has no more than four devices connected,
or that hub/switch can be cascaded with the Internet Gateway (see the instruction sheet for
your hub or switch). Any of the ports numbered 1-4 can be used as an Uplink port.
nect a variety of equipment, including computers, printers, scanners or other network
peripherals. Additionally, the Internet Gateway features a WAN port. The Internet Gate-
way ncan replace an existing hub or switch that has no more than four devices connected,
or that hub/switch can be cascaded with the Internet Gateway (see the instruction sheet for
your hub or switch). Any of the ports numbered 1-4 can be used as an Uplink port.
2