Leviton 47611-gt4 User Guide
Introduction
5
Rear Panel
Figure 3: Rear Panel
Reset Button
This button has two (2) functions:
• Reboot. When pressed and released, the Internet Gateway will
• Reboot. When pressed and released, the Internet Gateway will
reboot (restart).
• Clear All Data. This button also can be used to clear ALL data
and restore ALL settings to the factory default values. Hold in
for 5-7 seconds.
for 5-7 seconds.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED
LED has flashed TWICE.
4. Release the Reset Button. The Internet Gateway is now using the
factory default values.
WAN port
(10/100BaseT)
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
cable, use the supplied cable. Otherwise, use a standard LAN cable.
10/100BaseT
LAN connections
LAN connections
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
these ports.
Note:
Any LAN port on the Internet Gateway will automatically function
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
Power port
Connect the supplied power adapter here.