Leviton 47611-gt4 Quick Setup Guide
3
DI-008-47611-00A
4. Use one of the four Performance Patch Cords to connect the computer’s Ethernet port to
the data connector marked "B".
5. At the SMC, locate the Gateway port marked WAN. Use the second Performance Patch Cord
to connect this WAN port to the Category 5e Voice and Data Module port marked "A". This
is the port linked back to the modem’s data connector.
is the port linked back to the modem’s data connector.
6. Use the third Performance Patch Cord to connect one of the Gateway ports (labeled 1-4) to
the Category 5e Voice & Data Module port marked "B". This is the port that is linked back
to the computer’s data connector.
to the computer’s data connector.
NOTE: To connect up to three additional computers or peripherals, simply connect the
Gateway’s other numbered ports to Category 5e Voice & Data Module ports, which in
turn are cabled back to additional data connectors at the computer or peripheral
location.
turn are cabled back to additional data connectors at the computer or peripheral
location.
7. Reconnect the power to the modem, ensure your modem is connected to your broadband
service. (Phone service can be run through your Voice & Data Module, as seen in Figure 2,
page 5.)
page 5.)
8. Attach the power cord to the Gateway and plug it into an AC outlet, powering the Gateway.
9. Restart your computer.
Configuring the Gateway:
1. Launch your web browser, and enter: http://192.168.0.1 into the URL field of the browser
window. This is the default IP address for the Gateway. This IP address connects to the
Gateway firmware, not the Internet.
Gateway firmware, not the Internet.
2. Once the Gateway firmware is contacted, you should see a prompt for a user name and
password. Leave the user name field blank and type "leviton" in lower case in the
password field. The password is case sensitive; do not include the quotation marks.
password field. The password is case sensitive; do not include the quotation marks.
3. Click "OK".
4. Select the "Setup Wizard" on the left frame of page, under "Home" folder. You will be
guided through a series of questions to configure your Gateway.
NOTE: You will need your connection information from your ISP.
NOTE: If it's necessary to return the Internet Gateway to its factory default settings, press and
hold the "reset" button on the back of the module for six seconds.
If you need additional assistance, please call Leviton's Technical Support at
1-800-824-3005.
1-800-824-3005.
Client Notes
6
DI-008-47611-00A