Panasonic dmc-lc40 User Guide
14
Charging the Battery
1
Set the power switch to [OFF].
2
Insert the battery into the camera.
(P13)
(P13)
3
Open the terminal door.
4
Insert the connection plug of the AC
adaptor into the DC IN socket of the
camera.
adaptor into the DC IN socket of the
camera.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE.
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE.
5
Plug the AC adaptor into the
electrical outlet.
electrical outlet.
• The green status indicator
1 blinks and
charging starts.
6
When the status indicator stops
blinking, charging is complete.
blinking, charging is complete.
• After charging is finished, remove the AC
adaptor from the electrical outlet and then
remove the connecting plug from the DC IN
socket.
remove the connecting plug from the DC IN
socket.
ª Battery indicator
The remaining battery power is displayed on the LCD monitor. (This is not displayed
when using AC adaptor)
The remaining battery power is displayed on the LCD monitor. (This is not displayed
when using AC adaptor)
: The battery power is sufficient
: The remaining power is a little low
: The remaining power is low
: Recharge or replace the battery
KC3-PP.book 14 ページ 2002年4月5日 金曜日 午前11時55分