Panasonic aj-spc700 User Manual

38

Position the DISPLAY switch at [UB].

Press the HOLD button to display a date in the display
window.

Position the TCG switch at [SET].

Use the CURSOR and SET buttons to set the year,
month and day (Y/M/D).
Note that any later than 2030 cannot be set.

Press the HOLD button to display a time in the display
window.

Use the CURSOR buttons to set the hour, minute and
second (h/min/s).

Position the TCG switch at [F-RUN] or [R-RUN]. The
internal clock starts at the moment the switch position is
changed.

Press the HOLD button to display a time zone (time
difference between local time and Greenwich Mean
Time) in the display window.

Position the TCG switch at [SET].

Use the 

 and  buttons to set the desired hours and

minutes ahead of (no sign) or behind (– sign) the
Greenwich Mean Time).

Example: If the local time is five hours behind
Greenwich Mean Time,
 set the time zone to “5:00 –”.

The time zone is always recorded, together with the
date and time, as metadata.
See the table at right to set the time zone according to
your local time. 

Position the TCG switch at [F-RUN] or [R-RUN] to
accept the time zone.

z When using the camera-recorder for the first time, be

sure to perform this setting beforehand. Do not
change the setting during use of the camera-
recorder.

z When the TCG switch is positioned at [SET],

thumbnails cannot be manipulated.

z In Step 

, if the TCG switch is positioned at [F-RUN] or [R-

RUN], this also activate the internal clock.
To cancel date, time and time zone settings in process,
hold down the SET button and position the TCG switch at
[F-RUN] or [R-RUN]. 

z Clock accuracy fluctuates between about 

±

 30 seconds

per month when the power is turned off. If more accurate
timekeeping is required, check the time when the power is
turned on and, if necessary, reset the clock.

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ