Panasonic PT-44LCX65 User Guide

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo

Always be sure to follow the procedure given below to 
turn the Projection Display power ON and OFF.

• The lamp cooling fan will continue to operate for 

approximately 1 minute after the power is turned off. During 
this time, the POWER indicator will blink Red.

Press  POWER on Projection Display or Remote Control 
to turn power on.
The Power Indicator blinks Green for about 20 seconds 
and then turns solid Green.

The Power Indicator

• If the POWER button is accidentally turned off during use, 

after power is turned back on, it may take a short period 
before the lamp automatically comes on.

• After the unit is turned on, maximum picture brightness will be 

achieved in 5-10 minutes. This is normal.

• This unit consumes approx. 0.3 W (15W when CableCARD™ 

is inserted.) in OFF condition when plugged into an AC outlet.

Press POWER on Projection Display or Remote Control 
to turn power off.

• When the power cord is disconnected, the internal cooling 

fan stops op er at ing. In this case, the lamp will be insufficiently 
cooled and will take a while to turn ON again.

The Power Indicator blinks Red for about 1 minute and 
then LED turns off.

Off

Power – OFF

Red (blinking)

Power – OFF (Now cooling)

Green

Power – ON

Green (blinking) Power – ON (Preparing to light lamp)

Power shuts off after a Black Screen is displayed for a 
few seconds.

• If the POWER button is pressed during the Black Screen 

display, Power is turned back on.

To extend lamp life, if there is no signal to the 
set’s tuner for 5 minutes, the lamp will shut off 
automatically.

 POWER  button/
POWER indicator