3com 4800G Installation Instruction
Switch 4800G PWR 24-Port
15
Redundant power
system LED
system LED
RPS
Solid green
The AC power input and the DC power
input are both normal.
input are both normal.
Solid yellow
The DC power input is normal, but an AC
power failure occurs or no AC power is
connected.
power failure occurs or no AC power is
connected.
OFF
No DC power is connected.
Module LED
MOD Solid green
The module is in position and works
normally.
normally.
Flashing yellow
The switch does not support the module
or a module failure occurs.
or a module failure occurs.
OFF
No module is installed.
7-segment digital
LED
LED
Unit
POST running
The power LED flashes green The LED displays the POST test ID.
POST failed
The power LED flashes red
The LED flashes the POST test ID of the
failed test.
failed test.
Software loading
The power LED flashes green. A bar rotates clockwise around the LED.
Fan failure
The power LED is solid red.
The LED displays F.
Over-temperature alarm
The power LED is solid red.
The LED displays t.
Cluster state
The power LED is solid green. For a command switch, the LED displays C.
For a member switch, the LED displays S.
For a candidate switch, the LED displays c.
The LED displays 1 if there is only one unit.
PoE mode
The power LED is solid green. The LED displays the utilization of the
power supply.
Table 5 Descriptions of the LEDs on the front panel of Switch 4800G PWR 24-Port
LED Mark
Status
Description
0 - 20%
21 - 40%
41 - 60%
61 - 80%
81 - 100%