3com 5500-ei pwr Installation Instruction
1-23
Configuration procedure
z
Configure remote-ping Client (Switch A):
# Enable the remote-ping client.
<Sysname> system-view
[Sysname] remote-ping-agent enable
# Create a remote-ping test group, setting the administrator name to administrator and test tag to
ICMP.
[Sysname] remote-ping administrator icmp
# Configure the test type as icmp.
[Sysname-remote-ping-administrator-icmp] test-type icmp
# Configure the destination IP address as 10.2.2.2.
[Sysname-remote-ping-administrator-icmp] destination-ip 10.2.2.2
# Configure to make 10 probes per test.
[Sysname-remote-ping-administrator-icmp] count 10
# Set the probe timeout time to 5 seconds.
[Sysname-remote-ping-administrator-icmp] timeout 5
# Start the test.
[Sysname-remote-ping-administrator-icmp] test-enable
# Set the maximum number of history records that can be saved to 5.
[Sysname-remote-ping-administrator-icmp] history-records 5
# Display test results.
[Sysname-remote-ping-administrator-icmp] display remote-ping results administrator icmp
remote-ping entry(admin administrator, tag icmp) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 3/6/3
Square-Sum of Round Trip Time: 145
Last succeeded test time: 2000-4-2 20:55:12.3
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[Sysname-remote-ping-administrator-icmp] display remote-ping history administrator icmp
remote-ping entry(admin administrator, tag icmp) history record:
Index Response Status LastRC Time
1 3 1 0 2000-04-02 20:55:12.3
2 4 1 0 2000-04-02 20:55:12.3
3 4 1 0 2000-04-02 20:55:12.2
4 3 1 0 2000-04-02 20:55:12.2