3com 5500-ei pwr Reference Guide

 

1-1 

display vrrp [ verbose ] [ interface vlan-interface vlan-id [ vrid virtual-router-id ] ] 

Any view 

verbose: Displays detailed state information of VRRP. 

vlan-interface vlan-id: Displays VRRP state information of the specified VLAN interface. vlan-id is the 

VLAN interface ID. 

vrid virtual-router-id: Displays state information of the specified VRRP group. virtual-router-id is the 

VRRP group ID, in the range 1 to 255. 

Use the display vrrp command to display the brief VRRP state information. For details, refer to 

.  

Use display vrrp verbose command to display the detailed VRRP state information. refer to 

 

for details. 

z 

If you do not specify a VLAN interface or a VRRP group, the command will display the state 

information of all VRRP groups on the switch. 

z 

If you specify a VLAN interface only, the command will display the state information of all VRRP 

groups on the specified VLAN interface. 

z 

If you specify both a VLAN interface and a VRRP group, the command will display the state 

information of the specified VRRP group on the specified VLAN interface. 

# Display the VRRP state information about all the VRRP groups on the switch. 

<Sysname> display vrrp 

 Run Method      : VIRTUAL-MAC 

 Virtual Ip Ping : Disable 

 The total number of the virtual routers:  1 

  Interface     VRID  State       Run     Adver.  Auth  Virtual 

                                  Pri     Time    Type  IP 

-------------------------------------------------------------------------- 

  Vlan2         2     Initialize  100     1       NONE   173.160.0.1