3com 5500-ei pwr 参考指南
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
1-1
1
VRRP Configuration Commands
VRRP Configuration Commands
display vrrp
Syntax
display vrrp [ verbose ] [ interface vlan-interface vlan-id [ vrid virtual-router-id ] ]
View
Any view
Parameters
verbose: Displays detailed state information of VRRP.
vlan-interface vlan-id: Displays VRRP state information of the specified VLAN interface. vlan-id is the
VLAN interface ID.
vrid virtual-router-id: Displays state information of the specified VRRP group. virtual-router-id is the
VRRP group ID, in the range 1 to 255.
Description
Use the display vrrp command to display the brief VRRP state information. For details, refer to
.
Use display vrrp verbose command to display the detailed VRRP state information. refer to
for details.
z
If you do not specify a VLAN interface or a VRRP group, the command will display the state
information of all VRRP groups on the switch.
z
If you specify a VLAN interface only, the command will display the state information of all VRRP
groups on the specified VLAN interface.
z
If you specify both a VLAN interface and a VRRP group, the command will display the state
information of the specified VRRP group on the specified VLAN interface.
Examples
# Display the VRRP state information about all the VRRP groups on the switch.
<Sysname> display vrrp
Run Method : VIRTUAL-MAC
Virtual Ip Ping : Disable
The total number of the virtual routers: 1
Interface VRID State Run Adver. Auth Virtual
Pri Time Type IP
--------------------------------------------------------------------------
Vlan2 2 Initialize 100 1 NONE 173.160.0.1