3com 8807 Reference Guide

C

HAPTER

 20: 802.1

X

 C

ONFIGURATION

 C

OMMANDS

Use the dot1x supp-proxy-check command to configure the control method for 
802.1x access users via proxy logon the specified interface.

Use the undo dot1x supp-proxy-check command to cancel the control method 
set for the 802.1x access users via proxy.

Note that when performing this function, the user logging on via proxy need to 
run 3Com 802.1x client program,( 3Com 802.1x client program version V1.29 or 
above is needed).

This command is used to set on the specified interface when executed in system 
view. The parameter interface-list cannot be input when the command is executed 
in Ethernet Port view and it has effect only on the current interface. After globally 
enabling proxy user detection and control in system view, only if you enable this 
feature on a specific port can this configuration take effects on the port.

Related command: display dot1x.

# Configure the switch cut network connection to a user upon detecting the use 
of proxy on Ethernet 2/1/1 through Ethernet 2/1/8.

[SW8800] dot1x supp-proxy-check logoff

 

[SW8800] dot1x supp-proxy-check logoff interface Ethernet 2/1/1 to 

 

Ethernet 2/1/8 

# Configure the switch to send trap message upon detecting the use of proxy on 
Ethernet 2/1/9.

[SW8800] dot1x supp-proxy-check trap

 

[SW8800] dot1x supp-proxy-check trap interface Ethernet 2/1/9 

or

[SW8800] dot1x supp-proxy-check trap

 

[SW8800] interface Ethernet 2/1/9

 

[3Com-GigabitEthernet2/1/9] dot1x supp-proxy-check trap 

dot1x timer { handshake-period handshake-period-value | quiet-period 
quiet-period-value | tx-period tx-period-value | supp-timeout 
supp-timeout-value | server-timeout server-timeout-value }

undo dot1x timer { handshake-period | quiet-period | tx-period | 
supp-timeout | server-timeout }

System view

handshake-period: This timer begins after the user has passed the 
authentication. After setting handshake-period, system will send the handshake 
packet by the period. Suppose the dot1x retry time is configured as N, the system