3com 8807 Reference Guide

C

HAPTER

 53: SNMP C

ONFIGURATION

 C

OMMANDS

# Enable current port Ethernet6/1/1 to transmit the LINK UP and LINK DOWN trap 
information with the community name public

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[3Com-Ethernet6/1/1] snmp trap updown enable

 

[SW8800] snmp-agent target-host trap address udp-domain 10.1.1.1 

 

params securityname public

 

[SW8800] interface ethernet6/1/1

 

[3Com-Ethernet6/1/1] enable snmp trap updown 

snmp-agent community { read | write } community-name [ [ mib-view 
view-name ] [ acl acl-list ] ]

undo snmp-agent community community-name

System view

read: Indicates that MIB object can only be read.

write: Indicates that MIB object can be read and written.

community-name: Community name character string.

view-name: MIB view name.

acl acl-list: sets access control list for specified community.

Use the snmp-agent community command to configure community access 
name and enable the access to SNMP.

Use the undo snmp-agent community command to cancel the settings of 
community access name.

# Configure community name as comaccess and permits read-only access by this 
community name.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] snmp-agent community read comaccess 

# Configure community name as mgr and permits read-write access.

[SW8800] snmp-agent community write mgr 

# Delete the community name comaccess.

[SW8800] undo snmp-agent community comaccess