3com 8807 Reference Guide

C

HAPTER

 53: SNMP C

ONFIGURATION

 C

OMMANDS

# Create an SNMP group named test.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] snmp-agent group v3 test. 

snmp-agent local-engineid engineid

System view

engineid: Specifies the engine ID with a character string, only composed of 
hexadecimal numbers between 5 and 32 including.

Use the snmp-agent local-engineid command to configure a name for a local or 
remote SNMP engine on the switch.

Use the command to Using undo snmp-agent local-engineid command, you 
can restore the default setting of engine ID.

By default, the engine ID is corporation number + device information. Device 
information is determined according to different products. It can be IP address, 
MAC address or user defined text. However, you must use numbers in 
hexadecimal form.

# Configure the ID of a local or remote device as 1234512345.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] snmp-agent local-engineid 1234512345 

snmp-agent mib-view { included | excluded } view-name oid-tree

undo snmp-agent mib-view view-name

System view

included: Includes this MIB subtree.

excluded: Excludes this MIB subtree.