3com 8807 Reference Guide

        Tos 0 metric: 1

 

        E type :    2

 

        Forwarding Address: 0.0.0.0

 

        Tag: 1 

display ospf [ process-id ] nexthop

Any view

process-id: Process ID of OSPF. The command is applied to all current OSPF 
processes if you do not specify a process ID.

Use the display ospf nexthop command to view the information about the 
next-hop.

# Display the OSPF next-hop information.

<SW8800> display ospf nexthop

 

OSPF Process 1 with Router ID 1.1.1.1

 

Address        Type   Refcount     Intf Addr         Intf Name

 

---------------------------------------------------------------------

 

202.38.160.1    Direct   3          202.38.160.1          Vlan-interface2

 

202.38.160.2    Neighbor     1          202.38.160.1         Vlan-interface2 

Table 61   Description of the fields of the display ospf lsdb ase command

type 

Type of the LSA 

ls id 

Link state ID of the LSA 

adv rtr 

Router ID of the router originating the LSA 

ls age 

Age of the LSA in seconds 

len 

Length of the LSA 

seq# 

Sequence number of the LSA 

chksum 

Checksum of the LSA 

Options 

Options of the LSA 

Net mask 

Network mask 

E type 

Type of external route 

Forwarding Address 

Forwarding address 

Tag 

Tag

Table 62   Description of the fields of the display ospf nexthop command

Address 

Address of next hop 

Type 

Type of next hop 

Refcount  Reference count of the next hop, i.e., number of routes using this address as the 

next hop 

Intf Addr  IP address of the outgoing interface to the next hop