3com 8807 Reference Guide

Use the display ospf request-queue command to view the information about 
the OSPF request-queue.

# Display the information of OSPF request-queue.

<SW8800> display ospf request-queue

 

The Router’s Neighbors is

 

  RouterID:  1.1.1.1         Address: 1.1.1.1

 

  Interface: 1.1.1.3         Area: 0.0.0.0

 

  LSID:1.1.1.3          AdvRouter:1.1.1.3  Sequence:80000017  Age:35 

display ospf [ process-id ] retrans-queue

Any view

process-id: ID of an OSPF process. The command is applied to all current OSPF 
processes if you do not specify a process ID.

Use the display ospf retrans-queue command to view information about the 
OSPF retransmission queue.

# Display information about the OSPF retransmission queue.

<SW8800> display ospf retrans-queue

 

OSPF Process 200 with Router ID 103.160.1.1

 

Retransmit List

 

      The Router’s Neighbors is

 

  RouterID: 162.162.162.162 Address: 103.169.2.2

 

  Interface: 103.169.2.5     Area: 0.0.0.1

 

          Retrans list:

 

          Type: ASE  LSID:129.11.77.0  AdvRouter:103.160.1.1

 

          Type: ASE  LSID:129.11.108.0  AdvRouter:103.160.1.1 

Table 64   Description of the fields of the display ospf request-queue command

RouterID 

Router ID of neighbor router 

Address 

Address of the interface, through which neighbor routers communicate with 
the router 

Interface 

Address of the interface on the network segment 

Area 

Number of an OSPF area 

LSID:1.1.1.3  Link State ID of the LSA 

AdvRouter 

Router ID of the router originating the LSA 

Sequence 

Sequence number of the LSA, used to discover old and repeated LSAs 

Age 

Age in seconds of the LSA