3com 2226 PLUS User Guide

C

HAPTER

 1: I

NTRODUCING

 

THE

 B

ASELINE

 S

WITCH

The second and fourth (bottom) row of Status LEDs, 
which are colored yellow, show the duplex status of 
the related ports.

Off

No link, link is not yet negotiated, or the port is 
operating in half-duplex mode

Yellow

The port is operating in full-duplex mode

The unit is supplied with four self-adhesive rubber 
pads.

If the unit is to be part of a free-standing stack, apply 
the pads to each marked corner area on the under-
side of the unit. Place the unit on top of the lower 
unit, ensuring that the pads locate with the recesses 
of the lower unit.

The Switch automatically adjusts to the supply volt-
age. Only use the power cord that is supplied with 
the unit.

Use the Recovery button on the rear panel to reset 
the Switch to its factory defaults. For more informa-

tion, refer to 

 on 

The 3Com Baseline Switch 2226 Plus package 
includes the following items:

■

One 3Com Baseline Switch 2226 Plus unit

■

One power cord

■

Four standard height, self-adhesive rubber pads

■

One mounting kit

■

One CD-ROM, which contains this User Guide and 
the 3Com Discovery application

■

One warranty flyer

Before installing and using the Switch, verify that your 
Switch package has all these items. If any of the 
above items are damaged or missing, contact your 
3Com network supplier immediately.