3com 2948-SFP Plus User Guide
C
HAPTER 13:
C
ONFIGURING
Q
UALITY
O
F
S
ERVICE
157
Configuring Trust
Settings
Settings
The Trust Setup Page contains information for enabling trust on
configured interfaces. The original device QoS default settings can be
reassigned to the interface in the Trust Setup Page.
configured interfaces. The original device QoS default settings can be
reassigned to the interface in the Trust Setup Page.
To enable Trust:
1 Click Device > QoS > Trust Setup. The Trust Setup Page opens.
Figure 85 Trust Setup Page
The Trust Setup Page contains the following fields:
Trust Mode — Defines which packet fields to use for classifying
packets entering the device. When no rules are defined, the traffic
containing the predefined packet CoS field is mapped according to
the relevant trust modes table. Traffic not containing a predefined
packet field is mapped to “best effort”. The possible Trust Mode
field values are:
CoS — Classifies traffic based on the CoS tag value.
DSCP — Classifies traffic based on the DSCP tag value.
2 Define the fields.
3 Click Apply. Trust mode is enabled on the device.