Insignia is-hc040917 User Manual
VIDEO
Digital Connections
Getting Started
8
It's corresponding video and s-video input
jack is DVD.
It's corresponding video and s-video input
jack is VIDEO.
It's corresponding video and s-video input
jack is TV.
HINT
When you connect an audio/video unit to both of the digital and
analog terminals of this unit, make sure to connect to both
terminals of the same name.
Be sure to attach the covers when the OPTICAL terminals are
not being used, in order to protect the terminals from dust.
In order to make this unit perform successful DTS-decoding the
DTS bitstream must not be altered, manipulated or corrupted in
the process of sending the DTS bitstream from the DIGITAL
OUT terminal of an external unit to a digital signal input terminal
of this unit.
All digital audio signal input terminals are applicable to the
sampling frequency of 32 kHz, 44.1kHz and 48kHz.
analog terminals of this unit, make sure to connect to both
terminals of the same name.
Be sure to attach the covers when the OPTICAL terminals are
not being used, in order to protect the terminals from dust.
In order to make this unit perform successful DTS-decoding the
DTS bitstream must not be altered, manipulated or corrupted in
the process of sending the DTS bitstream from the DIGITAL
OUT terminal of an external unit to a digital signal input terminal
of this unit.
All digital audio signal input terminals are applicable to the
sampling frequency of 32 kHz, 44.1kHz and 48kHz.
If your CD player, LD player, DVD player, TV/satellite tuner, etc,
are equipped with coaxial or optical digital audio signal output
terminals, they can be connected to this unit's COAXIAL or
OPTICAL, or both terminals.
Digital audio signals are transmitted with less loss than analog
audio signals. In addition, digital audio signal connections are
necessary, especially for an LD player, a DVD player or a CD
player to send signals encoded with Dolby Digital or DTS to
this unit.
To make an optical digital connection between this unit and an
external unit, remove the cover from each optical terminal, and
then connect them by using a commercially available optical
fiber cable that conforms to EIAJ standards.Other cables might
not function correctly.
Even if you connect an audio/video unit to the OPTICAL (or
COAXIAL) terminal of this unit, you must keep the unit connec-
ted with the same named analog audio signal terminals of this
unit, because digital signal cannot be recorded by a tape deck
or VCR connected to this unit. You can switch the selection of
input signals between digital and analog easily.
DVD
CD
COAXIAL OUT
OPTICAL OUT
S-VIDEO OUT
VIDEO OUT
Notes