Clarion CMV1 User Guide

CMV1

1. Select the desired Category from the iPod 

Menu screen to display the corresponding list 
screen.

2. Press the [ENTER] button to enter the 

subfolder.

• When the other list screen is displayed, 

repeat this operation.

3. Press and hold the [DISPLAY] button.
4. Turn the [UP/DOWN] knob to select a letter or 

number.

5. Press and hold the [ENTER] button to search.

This system can play audio files (MP3/WMA/AAC) stored in an USB memory which is recognized as 
“USB Mass Storage Class device”. You can use your USB memory as an audio device by simply copying 
desired audio files into it.

Note:
• This system will not operate or may operate improperly with some USB memory.
• Files protected with any DRM can not be played.

●General notes
• When no data is present, the message “No 

File” will be displayed.

• The Podcast files of iTunes Store that stored in 

the USB memory device can not be played. 
Besides, the data that edit through some softs 
such as the Tag edit soft may not be played.

• When a USB memory device is composed of 

two or more drives, only one of the drives will 
be detected.

• When a USB memory device is disconnected and 

then reconnected, playback will begin from the 
previous position of the USB memory device.

●Notes on the MP3/WMA/AAC files
• This system can play the MP3/WMA/AAC files 

stored in the USB memory.

• For details, see the section “Precautions on the 

MP3/WMA/AAC files” (page 24)

• This system cannot play DivX files stored in the 

USB memory.

●Notes on the folder structure
• The folder hierarchy must be within 8 hierarchical 

levels. Otherwise, playback will be impossible.

• The maximum allowable number of folders is 

512 (including root directory and folders with no 
MP3/WMA/AAC file).

• The maximum allowable number of files in a 

folder is 255.

• You can store the MP3 files, WMA files, and 

AAC files together in a folder.

●Notes on the Tag titles
The limitations on the Tag titles are same as 
those in the MP3/WMA/AAC modes. See 
“Displaying MP3/WMA/AAC Tag titles” (page 24).
●Folder representation in the folder list
The limitations on the folder representation are 
same as those in the MP3/WMA/AAC modes. See 
“Folder representation in the folder list” (page 25).

1. Connect your USB memory to the USB 

connector.
The system will automatically detect the 
connected device, and change to the USB 
mode (USB Memory mode), and start 
playback after a while.
See also “Connecting/Disconnecting an USB 
Media Device” (page 12).

●When an USB memory is already connected
1. Press the [AUX/iPod] button to select the 

USB Memory mode.
The system changes to the USB mode (USB 
Memory mode), and starts playback from the 
previous position.

The following operations in the USB Memory 
mode are same as those in the MP3/WMA/AAC 
modes. See “Operating CD/MP3/WMA/AAC 
playback” (page 25) for details.

280PE3161BA_EN.book  Page 33  Thursday, March 12, 2009  1:12 PM