Xerox 4112 User Guide

Xerox 4112/4127 Copier/Printer System Administration Guide

9-12

9. Troubleshooting

The following are the notes and restrictions for using TCP/IP 

(LPD).

•

Take maximum care with the IP address settings. IP 

addresses are managed throughout the system as a whole. 

The configuration should be performed only after consulting 

with your network administrator.

•

Subnet Mask and Gateway addresses may be necessary 

depending on the network environment. Confirm with the 

network administrator and set up the necessary items.

•

When the port status is set to Enable, it sometimes 

automatically switches to Disable if the machine has 

insufficient memory. If this happens, either set an unused port 

to Disable, or adjust the assigned memory size.

•

Adjust the receiving buffer 

 size according to 

usage. When the receiving buffer 

 size is smaller 

than the transmitted data, the machine may not be able to 

receive the data.

•

Take maximum care with the IP address settings. IP 

addresses are managed throughout the system as a whole. 

The configuration should be performed only after consulting 

with your network administrator.

•

When performing network settings (IP address, and so forth) 

on a host under the NIS (Network Information Service) 

management, consult with the NIS administrator.

Selected print language on the 

machine does not match the print 

language of the print data.

Confirm the selected print 

language on the machine and the 

print language of the print data.

Select the print language on the 

machine to match the print data.

The computer is not using the print 

driver supplied with the machine 

(using a print driver from another 

company).

Confirm if the print driver on the 

computer is the one supplied with 

the machine.

Select the print driver supplied 

with the machine on the computer. 

If it does not appear on the 

selection list, install the print driver 

supplied with the machine and 

select it. The operation is not 

guaranteed if another print driver 

is used.