Xerox 2101 Release Note

 

 Does not force any back cover mode. The front cover is printed according to 

Booklet Front Cover Mode, and the remaining pages of the document are printed in order 
after that, with no blank pages in between. Depending on where the last pages of the 
document fall, the back cover may be printed on both sides, printed on the front side only, 
or blank.

 

 Prints the last page of the document on the front of the back cover.

 

Prints the last page of the document on the back of the back cover.

 

 Prints the last two pages of the document on the front and back of the back 

cover. 

 

 Leaves the back cover blank on both sides. 

For all Booklet Back Cover Mode settings except for AutoSelect, blank pages may be 
inserted at the end of the booklet’s content, depending on the number of pages in the 
document. For example, if Booklet Back Cover Mode is set to Print Both, blank pages are 
inserted before the last two pages of the document as needed to make the last two pages fall 
on the back cover.

 

Choose Auto Select to use any tray that matches the Booklet Cover Media and Booklet 
Cover Media Color settings (see the following steps). 

 

If you also set the Paper Source option (which specifies the paper source for the 

booklet’s contents) to Auto Select, the booklet cover and its contents are printed from the 
same tray. Make sure that either Booklet Cover Source or Paper Source is set to a specific 
tray.

For a blank cover, choose Tray 2, Tray 3, Tray 4, or Tray 7.

For a printed cover, choose Tray 2, Tray 3, or Tray 4.

 

Choose Normal or Heavyweight1A for Tray 2, Tray 3, or Tray 4.

Choose Heavyweight1B or Heavyweight2 for Tray 7.

 

If you select a weight other than Normal, be sure that you program a tray to that 

weight at the copier before submitting the job to print. 

 

Choose White, Green, Blue, Yellow, Buff, Goldenrod, Other 1 or Other 2.

 

If you select a color other than White, be sure that you program a tray to that color 

at the copier before submitting the job to print.