Xerox 6120 Reference Guide
191
Using the Network Setup Menu Options
If the printer is connected to a network, the following settings should be
specified. For details about each setting, contact your network administrator.
specified. For details about each setting, contact your network administrator.
"
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP first.
turn off DHCP first.
TCP/IP
Enable
DHCP/BOOTP
IP Address
Purpose
Enables or disables TCP/IP.
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
Options
YES
NO
Default
YES
Purpose
If there is a DHCP or BOOTP server on the network,
specifies whether the IP address and other network
information is automatically assigned by the DHCP or
BOOTP server.
specifies whether the IP address and other network
information is automatically assigned by the DHCP or
BOOTP server.
Options
ON
OFF
Default
ON
Purpose
Sets the IP address of this printer on the network.
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between
triplets.
number; use the Left and Right keys to move between
triplets.
Default
192.168.001.002