Xerox 162 User Guide

4.

Gently press the roller to the right to free its left side. Then angle the 
roller to the front of the scanner until it is clear of the housing, and 
bring it out and away from the scanner body.

5.

Discard the worn roller. It cannot be repaired. 

6.

Before installing the new roller, clean any dust that may have gotten 
on it during shipping.

7.

Insert the right end of the roller into its housing socket. Make sure the 
lock tab is facing up and the lock flange is not obstructed. If the gears 
on the end of the roller do not engage easily, slightly rotate the roller 
while gently pressing it into the housing until you feel them engage. 
Do not force the gears to engage.

8.

When you are certain that the gears are engaged, swing the roller into 
it scanner and align the left side with its mount. Then gently slide the 
roller to the left to fit its left end into its mount. Make sure the left end 
of the roller is firmly seated into its mount.