Xerox 162 User Guide

9.

Rotate the lock tab down so the locking flange catches on its latch. Do 
not force the lock tab into place. If it does not rotate freely to lock into 
place, make sure the flange is properly seating on its latch.

10. Close the cover when you’re finished.

In addition to the troubleshooting information contained in this section, 
please see the Readme file on your installation CD. Also visit our web site 
at www.xeroxscanners.com for additional technical information. 

Check for one of these possible problems:

•

Are the cables loose or not plugged in securely? Inspect the 
cable connections. Make sure the cables are plugged in securely.

•

Is the scanner’s status light on? Turn on the scanner’s power. If the 
status light doesn’t come on, plug the power supply into another 
electrical outlet.

•

Did you restart the computer after installing the software? If you 
didn’t restart the computer, it may not have loaded all of the software 
files. Try restarting your computer.

•

Did you plug the scanner into a USB hub? If you’re using a USB 
hub to connect the scanner, the hub must have its own power supply. 
If the hub does not have its own power supply, plug the scanner into a 
USB port on the computer.

•

Did you select another TWAIN source for acquiring images? If 
you use multiple TWAIN devices with your computer, you may have 
selected another source for images. Make sure Xerox DocuMate 
162 is selected as the scanner.

The pages were probably scanned in crooked, or skewed. To use 
AutoCrop to Original, the pages must be scanned in straight. Adjust the 
paper guides on the scanner so pages feed in straight.