Xerox 123 User Manual

The machine has built-in information to identify and manage error messages and 
problems. It also contains troubleshooting steps to help resolve problems.
Refer to the information contained in this chapter to resolve any troubleshooting issues.

If a fault or problem occurs, there are several ways in which you can identify the type 
of fault. Once a fault or problem is identified, establish the probable cause, and then 
apply the appropriate solution.

• If a fault occurs, first refer to the screen messages and animated graphics and clear 

the fault in the order specified.

• If the problem is not solved by following the screen messages and graphics, refer to 

Troubleshooting Tables on page 325 and apply the appropriate solution as 
described.

• Also refer to the fault codes displayed on the touch screen in the Machine Status 

mode. Refer to Fault Codes on page 329 for an explanation of some of the fault 
codes and corresponding corrective actions.

• Alternatively, contact the Key Operator for assistance.

• In some cases, it may be necessary to switch the machine off and then on. Refer to 

• If the problem persists, or a message indicates that you should call for service, refer 

NOTE: If fax jobs are queued in the machine not equipped with the hard disk and a 
loss of power occurs, the machine will print a Power Off Report when the machine is 
switched on. This will show a list of the fax jobs lost.