Xerox C118 Network Guide

This guide includes instructions for:

■

■

■

■

This setup guide provides instructions for connecting the Xerox WorkCentre M118/M118i on an Ethernet 
TCP/IP network. It includes procedures for setting up the network connection using either of the following 
methods:

■

DHCP: Use this method to allow a DHCP server to automatically assign an IP address. This is the factory 
default setting.

■

Static IP address: Use this method to manually assign an IP address provided by the network 
administrator.

The System Administrator Guide provides detailed instructions for setting up a network connection. It also 
provides setup procedures if you are using Novell IPX. The System Administrator Guide is located on the 
Customer Documentation CD-ROM and on the Xerox website.

Before turning on the machine:

■

Confirm that an existing operational network utilizing TCP/IP is available.

■

Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernet 
port on the network.

The RJ45 Ethernet cable is not supplied by Xerox.