Xerox 240 Installation Instruction

Page 1

Apple Macintosh (AppleTalk) Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST

Press the 

Setup button.

At the next screen, press the 

Setup button.

At the next screen, press the 
AppleTalk button.

At the next screen, press the 

and Media button.

At the next screen, press the 

Enable 

button to enable the AppleTalk 
protocol.

Press 

Save.

Assign a Name and Zone to your printer.

You will be returned to the previous 
screen. Press the 

Name and Zone 

button.

At the next screen, press the 

Name button and enter the name you 
want for the printer (this is the name 
that will appear in the Chooser on your 
workstations) using the touch panel 
keys. Then press 

Save.

You will be returned to the previous 
screen. Press the 

Zone Name button, 

enter the desired text for this item 
using the touch panel keys, then press 
Save (the printer default is * which 
means the printer will appear in ALL 
zones).

Press the 

Exit Tools button. 

If your printer is equipped with a Token Ring 
interface, use the 

Card supplied in this Quick Install Card set to 
set the Ring Speed and Source Routing settings 
for your environment.

Record the following information

AppleTalk Name ________________________

AppleTalk Zone ________________________

Connect your Document Centre 240/255/
265 to the network with the appropriate 
cabling.

Enter the 

Tools pathway

Press the 

Access  ( )button.

On the keypad enter 

1111 or the 

current password. Press the 

Enter 

button when finished. If your printer is 
an ST model press the 

Go to Tools 

button, otherwise skip to the next step. 

The Touch Screen will be used for the 
remainder of the data entry.

Enable the AppleTalk protocol.

For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797      Canada: 1-800-939-3769