Xerox 4517 User Guide
X e r o x N e t w o r k I n t e r f a c e C a r d ( X N I C )
C-56 ❖ D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
Installing the XNIC
Note
Be sure to refer to the XNIC Configuration Guide for
important network connection instructions.
1
Power OFF the printer and disconnect the power cord and any interface cables.
• If installing the XNIC-T’RING, continue with Step 2.
• If installing the XNIC-E’NET, skip to Step 4 on page C-57.
• If installing the XNIC-L’TALK, skip to Step 5 on page C-57.
2
Note the XNIC-T’RING serial number (A)
and Token Ring address (B).
This information will not be
accessible after the card is installed.
accessible after the card is installed.
3
Note the XNIC-T’RING data rate, which
is determined by the jumpers on the JX2
pins (A).
• Pins 1 and 2 are strapped together for
4 mbps.
• Pins 2 and 3 are strapped together for
16 mbps.
This information will not be
accessible after the card is installed.
accessible after the card is installed.
Skip to Step 5 on page C-57.
chapterc.frm Page 56 Friday, July 11, 1997 9:25 PM