Xerox C20 User Manual
Printer Memory
C-8
❖
DocuPrint C20/NC20 User Guide
Closing the System
Board from the Front
Complete the following steps after you have installed the
printer memory
printer memory
1
Reinstall the system board access cover.
A
While holding the cover at the angle shown, align the
tabs on the back of the access cover with the slots
located at the rear of the access opening.
tabs on the back of the access cover with the slots
located at the rear of the access opening.
B
Push down the top of the access cover until it snaps
into place.
into place.
2
Reattach the input tray and output bin.
If you need help, see the Quick Installation Guide.
3
Reconnect all cables on the back of the printer.
4
Reconnect the power cord to the printer and a properly
grounded electrical outlet.
grounded electrical outlet.
5
Make sure the
Ready
message appears on the Control
Panel display. If an error message appears, see Chapter 5
in the System Administrator Guide.
in the System Administrator Guide.
To verify that the memory card option is installed
properly, see Chapter 3, Printing Menu Settings.
properly, see Chapter 3, Printing Menu Settings.