Xerox C20 User Manual
Option Card Installation
C-22
❖
DocuPrint C20/NC20 User Guide
Installing an
Option Card
Complete the following steps to install either the Tri-Port
Interface card or the Hard Disk option:
Interface card or the Hard Disk option:
1
Remove the two screws from the metal plate covering the
opening for the cable connector. Save the screws.
opening for the cable connector. Save the screws.
2
Grasp the tab on the end of the metal plate and pull the
plate straight out. Discard the metal plate.
plate straight out. Discard the metal plate.
3
Unpack the option card. See the packing materials.
To complete the following installation
instructions, you should be at eye level with the
printer option card slot.
instructions, you should be at eye level with the
printer option card slot.
4
Locate the option card connector on the printer system
board. It is located inside the printer. You can access it
through the option card slot.
board. It is located inside the printer. You can access it
through the option card slot.
5
Locate the card guide inside the option card slot on the
left side of the slot.
left side of the slot.