Xerox 8400B User Guide

 

 

 

Below the Standard Report Polling section is the Custom Report Polling section of 
the Reporting Configuration Window. This is used to specify how often data is 
collected for generating custom reports. Using slide levels, the poll can be 
configured for hours (1 - 23) or days (1 - 31). 

NOTE: Selecting None for the Standard or Custom Report Polling Interval 

affects the available data for generating custom and standard reports. If 
No Standard Report is selected and the custom report polling interval is 
set to every 12 hours, then every report generated between each 12 hour 
poll is taking data from only one poll. For example, if the polling period 
is set to poll at 12:00 a.m. and 12:00 p.m., all reports generated between 
12:00 a.m. and 12:00 p.m. relies on the 12:00 a.m. poll for information. 
If a report is generated for 1:00 a.m. to 3:00 a.m. and then from 4:00 
a.m. to 11:00 a.m. both reports generate based on the 12:00 a.m. data. 
The same holds true for switching back to standard reports. Until the 
polling period for the standard reports catches up, any standard reports 
are generated with the custom reports polling data. 

 
The Report Attributes button accesses the Select Report Attributes window. This 
is where the content of a Printer report may be modified. Name and Lifetime 
Impression Count are standard on every report. Information shown in the window 
below may also be included. 

 

Refer to “Generating Reports” in Chapter 5    for details on PrinterMap report 
attributes.