Xerox 128 Service Manual
DocuTech 128/155/180 HighLight Color Operator Guide
5- 13
Technical information
*Although the diagonal meets the 18-inch (457 mm) rotation limit,
the paper stock long dimension exceeds the processor path width.
The sheet must stay in the short-edge feed orientation throughout
the paper path.
the paper stock long dimension exceeds the processor path width.
The sheet must stay in the short-edge feed orientation throughout
the paper path.
NOTE: Non-United States customers: The part numbers in this
table are for the United States only. Contact your local
representative for common sizes used in Europe, Japan, Canada,
etc.
table are for the United States only. Contact your local
representative for common sizes used in Europe, Japan, Canada,
etc.
Table 5-9. Other paper sizes that can be rotated
For media sizes that are not listed in the above tables, view the
graph shown in figure 5-1. The graph can be used to determine
which sizes of media can and cannot be rotated within the Bypass
Transport.
graph shown in figure 5-1. The graph can be used to determine
which sizes of media can and cannot be rotated within the Bypass
Transport.
10.5 x 14.5
267 x 368
17.90
NO*
2-up of US 7.25 X
10.5 in.
(Executive)
10.5 in.
(Executive)
US Ledger/
US B-Size
US B-Size
11.0 x 17.0
279 x 432
20.25
NO
2-up of US 8.5 x
11.0 in. (Letter)
11.0 in. (Letter)
Common
size name
Inches x
inches
Millimeter
equivalent
Diagonal in inches
Can be
rotated
rotated
Comment
(similar to or the
same as)
Common
size name
Inches x
inches
Millimeter
equivalent
Diagonal in inches
Can be
rotated
rotated
Comment
(similar to or the
same as)
Largest
square
square
12.73 x 12.73
323 x 323
18.00
YES
Largest
rectangle
rectangle
10.89 x 14.33
277 x 364
18.00
YES
Length is
constrained by
paper path width.
constrained by
paper path width.